Michelin launches the X-CRANE 2 tyre in size 445/95 R 25. It offers enhanced load capacity, improved fuel efficiency, and increased durability for all-terrain cranes.
Michelin Delivers Enhanced Performance and Efficiency for All-Terrain Cranes
Following an initial size launch in the summer of 2024, the MICHELIN X-CRANE 2 is now available in size 445/95 R 25 178F TL. This tyre has been specifically designed for all-terrain and mobile tower cranes, suitable for both on- and off-road use. It combines a construction casing with a MICHELIN-inspired truck tyre tread.
The X-CRANE 2 was developed in collaboration with leading companies in the industry, based on over a decade of experience. Designed to meet the needs of cranes, it delivers high reliability, energy efficiency, and productivity.
Strong and Fast
The new MICHELIN X-CRANE 2 weighs 5% less than its predecessor, the MICHELIN X-CRANE +. Its low rolling resistance reduces carbon emissions through enhanced fuel efficiency, resulting in lower operational costs.
Compared to the main competitor, the fuel consumption of machines fitted with this tyre is reduced by approximately 13.3%. This corresponds to around 826 litres of fuel saved. It equals roughly £1,111 for a crane with 10,000 kilometres (6,213.7 miles) mileage.
It allows vehicles to carry heavier loads at the same speed thanks to the new load and speed index, which has changed from 174F to 178F. The MICHELIN X-CRANE 2 can carry 800 kg (1,764 lb) more per tyre when traveling at 80 kph (50 mph) due to its new casing. This increased load capacity represents an additional load of 1.6 metric tons per axle. At the same time, engineers were able to reduce heat build-up, resulting in enhanced durability and performance under demanding conditions.
Consistent Michelin Performance
The tyre’s braking performance has also been further improved. On wet roads, the braking distance of the MICHELIN X-CRANE 2 is 21% shorter than that of its main competitor. With M+S marking, the 445/95 R 25 size is also suitable for use in mud and snow. The tyre tread features the MICHELIN REGENION technology. REGENION stands for different types of lamellae that form a changing profile, giving the tyre high levels of grip and traction throughout its entire service life and in all weather conditions.
To create these complex treads, the tyre moulds are partially manufactured using a process called 3D metal printing. REGENION also reduces tread deformation and rolling resistance, which lowers fuel consumption.
The new X-CRANE 2 in the 445/95 R 25 size is approved for numerous machines on both the European and American markets. These include the LTM, LTC, and LG models by Liebherr, the GMK model by Grove, the AC model by Tadano, and the AT models by Link-Belt for the US market.
